Verifying Snmp Is Operational - Cabletron Systems SmartSwitch 9W006 User Manual

USER'S GUIDE
2. If Remote Mac appears in Select a file server: box, then AppleTalk Routing over the WAN
connection is operational.
3. If Remote Mac IS NOT displayed, then AppleTalk Routing feature over the WAN connection
is not operational. Refer to
Diagnosis chapter.
V SNMP
ERIFYING
1. To verify that the SNMP feature is operational, enter the snmp stats command at the
administration console. If the statistics display appears, the SNMP subsystem should be fully
operational. If the following message is displayed, SNMP is not operational:
SNMP is not enabled
If the preceding message is displayed, refer to
possible actions you may take to make the SNMP feature operational.
2. To verify that the MIB objects can be retrieved via the SNMP get command, begin by making
sure that the latest version of the enterprise MIB (the ih_mib.asn file) has been compiled at the
desired SNMP network management station(s). Once the new version of the MIB is compiled,
you can issue the SNMP get command.
3. To verify the SmartSwitch Remote Access Module SNMP Agent is returning the correct values,
it is possible to compare the values of the MIB objects retrieved via the SNMP get command to
the output available via various system administration console and dynamic management
commands. For example, the isdn usage console command displays B-channel information.
This information corresponds to the MIB isdnUsageMonitor group objects, a subset of the
ihSystemMonitor group. The dr console command will return output that contains
information that corresponds to the MIB ihStatusReport table. Other console commands that
will output information that includes values that correspond to MIB objects are ds , udp stats ,
ip stats, and snmp stats.
72 SmartSwitch Remote Access Module
AppleTalk Routing Operation Over the WAN Connection
O
IS PERATIONAL
SNMP in the Problem Diagnosis chapter for
in the Problem