Telnet - Cabletron Systems SmartSwitch 9W006 User Manual

USER'S GUIDE
T
ELNET
Telnet Client
IN_A> LAN TEST
LAN Test Passed
Remote 1
Telnet is the standard way of providing remote login service. With Telnet, any user on the LAN or
WAN executing a standard Telnet client program can remotely login to the SmartSwitch Remote
Access Module and get an SmartSwitch Remote Access Module console session. When you have an
active console session, SmartSwitch Remote Access Module commands can be entered as if you
have a locally-attached keyboard and monitor. Once you use Telnet to login to the SmartSwitch
Remote Access Module, it is possible to make configuration changes to the SmartSwitch Remote
Access Module using SFVRA-SFG.
In the first Telnet illustration (see previous page), the Telnet client is not an SmartSwitch Remote
Access Module. It is also possible to use the SmartSwitch Remote Access Module as the Telnet
client. This allows you to remotely manage an SmartSwitch Remote Access Module with an
SmartSwitch Remote Access Module. The benefit from this is you can now use an SmartSwitch
182 SmartSwitch Remote Access Module
IN_A> LAN TEST
LAN Test Passed
SITE HQ
MMAC PLUS
C a b l e t r o n
Systems
WORKGROUP REMOTE ACCESS SWITCH
LINE LINE
LAN 1 2
POWER SERVICE TX RX 10BASE-T
CH-1 CH-2 CH-1
SYNC D-CH SYNC
ISDN
MMAC PLUS
C a b l e t r o n
Systems
SITE.2
LINE LINE
3 4
CH-2 CH-1 CH-2 CH-1 CH-2
D-CH SYNC D-CH SYNC D-CH
AGI