Cabletron Systems SmartSwitch 9W006 User Manual page 278

USER'S GUIDE
Dec Value Hex Value
97
98
99
100
101
102
103
111
112
113
127
278 SmartSwitch Remote Access Module
Q.931 Cause
61 message type non-existent or not implemented
Indicates that the receiving equipment received a message that was
not recognized either because the message type was invalid, or
because the message type was valid but not supported. This is either
a problem with the remote configuration or a problem with the local
D-channel.
62 message not compatible with call state
or
message type non-existent or not implemented
or
wrong message
Indicates that an invalid message was received and that no standard
cause applies. D-channel error. If this error is returned
systematically, report the occurrence to your authorized service
provider.
63 information element nonexistent or not implement
Indicates that an invalid message was received by the remote
equipment that contained information elements which were not
recognized. D-channel error. If this error is returned systematically,
report the occurrence to your authorized service provider.
64 invalid information element contents
Indicates that a message was received by the remote equipment that
included invalid information in the information element. D-channel
error.
65 wrong message for state (message not compatible with call state)
Indicates that remote equipment received an unexpected message
that did not correspond to the current state of the connection. D-
channel error.
66 recovery on timer expiry
Indicates that an error-handling (recovery) procedure has been
initiated by a timer expiry. This should be a temporary problem.
67 mandatory information element error
6F protocol error
Indicates an unspecified D-channel error when no other standard
cause applies.
70 local procedure error 1TR6
71 remote procedure error 1TR6
7F internetworking, unspecified
Indicates that an event occurred but that the network does not
provide causes for the actions that it takes, therefore the precise
nature of the event cannot be ascertained. This may, or may not,
indicate the occurrence of an error.