Viewing Throughput Information - Cabletron Systems SmartSwitch 9W006 User Manual

The actual bandwidth utilization, along with the current underload setting, is displayed for each
throughput sample. After 32 samples are displayed, the newest sample is displayed at position 32
and all other samples are shifted left one position.
Throughput Monitor
Wide Area Network Bandwidth Utilization to site
% of current
bandwidth
Sample Rate (seconds):
< Press
Note: If data compression is being used, an extra line will be displayed on the Connection
Monitor screen that will provide the compression and decompression ratios, and the
estimated throughput. The estimated throughput is calculated as follows:
est. thruput (in Kbits/second) = [(uncmp bits + undmp bits)/sample period)]/1000
Where uncmp bits = the number of uncompressed bits
undmp bits = the number of undecompressed bits
sample period = configured length of the sample period
T M
HROUGHPUT ONITOR
# 1. Indicates the site name for the connected site that was selected on the Connection Monitor
screen.
# 2. Indicates the current bandwidth in place to the connected site. This number will be
updated as calls are added or released.
= UNDERLOAD BANDWIDTH
100
30
0
8
Throughput Parameters
Overload: Trigger 01
Underload: Trigger 05
Idle: Trigger 05
F to Freeze data capture,
C
ONTENTS
#1
sitename @ current bandwidth Kbps
= ACTUAL BANDWIDTH UTILIZATION
16 24 32
Samples
03
Window 02 Utilization (%) 10
Window 10
Window 05 Utilization (%) 10
Esc to return to Connection Monitor >
S C
YSTEM OMMANDS

Viewing Throughput Information

#2
9W006 and 9W007 201