Cabletron Systems SmartSwitch 9W006 User Manual page 124

USER'S GUIDE
[DHCP-P] Ignoring offers from DHCP server x.x.x.x; the server MUST be on a primary LAN interface, or
IP addresses will not be obtained
In order for the DHCP proxy client to successfully obtain IP addresses for multiple interfaces, the
DHCP server must reside on a primary LAN interface. If it does not, this message is written to the
Report Log, and no IP addresses will be obtained from the server and placed into the IP Address
Pool. To correct, use SFVRA-CFG to change the DHCP server's interface from a secondary interface
into a primary interface for that LAN port.
[DHCP-P] Invalid DHCP Server LAN port encountered in configuration; NIF entry not activated
This message appears when the DHCP Proxy Client encounters an invalid configuration setting for
an IP network interface's LAN port on which the DHCP server is to be reached. This will result in
no IP addresses being obtained for the network interface in question. Contact your Distributor or
Customer Support.
[DHCP-P] Proxy Client enabled
This message will appear whenever the DHCP Proxy Client has been successfully enabled. This
message will appear during system initialization (if configuration values have enabled it).
[DHCP-P] Proxy Client initialization failed
This message indicates that the DHCP Proxy Client did not initialize successfully. The DHCP Proxy
Client will not be operational. Contact your Distributor or Customer Support.
[DHCP-P] UDP port (67) opened
The DHCP Proxy Client is being enabled and it must open the BOOTPS UDP port (port 67). This
message will occur during system initialization. If the DHCP Relay Agent is also enabled, it may
not be necessary for the Proxy Client to open this UDP port.
[DHCP-P] UDP port (68) opened
The DHCP Proxy Client is being enabled and it must open the BOOTPC UDP port (port 68). This
message will occur during system initialization.
[DHCP-R] Failed to allocate memory for transmit buffer pool
The system was unable to allocate memory for the DHCP Relay Agent's transmit buffer pool
during initialization. The Relay Agent will not become operational. Contact your Distributor or
Customer Support.
[DHCP-R] Failed to open UDP port (67), erc = <x>
An error occurred while attempting to enable the DHCP Relay Agent. The Relay Agent must open
the BOOTPS UDP port in order to operate successfully. If this port could not be opened, the Relay
Agent will not be enabled. Contact your Distributor or Customer Support.
[DHCP-R] Relay Agent enabled
The DHCP Relay Agent has been successfully enabled. This message will appear during system
initialization (if configuration values have enabled it).
[DHCP-R] Relay Agent initialization failed
This message indicates that the DHCP Relay Agent did not initialize successfully. The Relay Agent
will not be operational. Contact your Distributor or Customer Support.
124 SmartSwitch Remote Access Module