Cabletron Systems SmartSwitch 9W006 User Manual page 200

USER'S GUIDE
connections available is less than that amount (33). This means that any of the following
combinations of connections would be allowed:
Physical Connections
If there was enough memory for all connections, the connection table would reflect both
potential and actual connections as the same number.
wan stats
Displays the current system WAN connection statistics. Refer to
available statistics and their definitions.
From the "Connection Monitor" screen you can press:
<Arrow Keys>
To select a site that is currently connected.
<Enter>
To view throughput monitoring for the selected site. Refer to the section titled
Throughput Information,
<Esc>
To exit the Connection Monitor screen.
V T
IEWING HROUGHPUT
The Throughput Monitor screen displays the system throughput monitoring feature in action. To
enter this screen:
1. Issue the mc command to display the connection monitor screen.
2. Use the <arrow keys> to move the cursor down to the specific site for which you would like to
view throughput information.
3. Press <enter> to display the throughput monitor screen for that site.
Throughput monitoring information can be very useful for fine-tuning your bandwidth
configuration parameters. Note that this feature is not available through a Telnet session. Refer to
the Configuring Call Control chapter of the Central Site CSX user documentation for a complete
description of throughput parameters.
200 SmartSwitch Remote Access Module
X.25
8
0
0
2
for details.
I
NFORMATION
Frame Relay
25
32
0
2
0
1
33
29
WAN Statistics, for a list of
Viewing