USER'S GUIDE
Idle
The number of idle conditions that caused the last switched connection to be disconnected.
A
T
S
PPLE
ALK
TATISTICS
You may display AppleTalk protocol statistics (subdivided into six subgroups) and AppleTalk port
statistics.
You can display all six subgroups of the AppleTalk protocol statistics by issuing the atalk stats
command, or you can display the individual subgroups by adding an extra variable to the atalk
stats command.
You can display the AppleTalk port statistics by issuing the atalk port stats console
command. A definition of these statistics begin on
A
T
P
PPLE
ALK
ROTOCOL
The six subgroups of AppleTalk protocol statistics are:
•
AppleTalk DDP Statistics
•
AppleTalk AEP Statistics
•
AppleTalk RTMP Statistics
•
AppleTalk ZIP Statistics
•
AppleTalk NBP Statistics
•
AppleTalk ATP Statistics
We include a section of available statistics and their definitions for each subgroup.
A
T
D
D
PPLE
ALK
ATA
ELIVERY
You can display this subgroup of AppleTalk statistics by issuing the atalk stats ddp console
command.
ddpOutRequests
The total number of DDP datagrams which were supplied to DDP by local DDP clients in requests
for transmission. Note that this counter does not include any datagrams counted in
ddpForwRequests.
ddpOutShorts
The total number of short DDP datagrams which were transmitted from this system.
ddpOutLongs
The total number of long DDP datagrams which were transmitted from this system.
ddpInReceives
The total number of input datagrams received by DDP, including those received in error.
ddpInLocalDatagrams
The total number of input DDP datagrams for which this system was their final DDP destination.
238
SmartSwitch Remote Access Module
S
TATISTICS
P
(DDP) S
ROTOCOL
TATISTICS
page
242.