Cabletron Systems SmartSwitch 9W006 User Manual page 191

5. Choose Call CC Device from the Carbon Copy command screen.
Press: <F1>
The system will prompt you for a phone number. If you are using remote access with modems,
then enter a phone number. If you are directly connected with a null-modem cable, then no
phone number is required; just press the enter key.
6. Type: <phone number><return>
(or just <return> if directly connected)
The system will prompt you for a password. The default password set on each SmartSwitch
Remote Access Module is "CC". We recommend that you change this password on each
SmartSwitch Remote Access Module using the CCINSTAL program.
7. Type: cc<return>
(or <your password><return> if the password has been changed)
If connection with the SmartSwitch Remote Access Module is successful, then the system will
remove the Carbon Copy screen. An active administration session now exists with the
SmartSwitch Remote Access Module.
If connection with the SmartSwitch Remote Access Module is not successful, then the system
will return an error message in approximately 60 seconds. Check the cable connections, phone
number, and password. If the connection with the SmartSwitch Remote Access Module is still
unsuccessful, report the problem by using the procedures defined in
T R
ERMINATING A EMOTE
This section tells you how to terminate a remote administration session from the administration
console PC. You may need this information if you want to make changes to an SmartSwitch Remote
Access Module, and then use the same administration console PC to access a different SmartSwitch
Remote Access Module.
1. Return to the Carbon Copy command screen.
Press: <ALT><RIGHT SHIFT> (at the same time)
This will return the user to the Carbon Copy main screen. In the lower right hand corner, the
following commands will be displayed. This command menu is function-key driven.
[F1]
[F3]
[F4]
[F5]
[F6]
[F8]
[F9]
[F10]
2. Choose "
Terminate Link
<F1>
3. Carbon Copy will ask if you really want to terminate the link. To answer yes, press:
<return>
A S
DMINISTRATION ESSION
Terminate Link
Capture Screen/Session
Review/Replay Captured Image
File Transfer Package
Printer/LOG/DOS Control
Data Link Maintenance
Repaint Screen & Return
Return to Application
" from the Carbon Copy command menu. Press:
R M
EMOTE ANAGEMENT
Carbon Copy
Getting Assistance.
9W006 and 9W007 191