Cabletron Systems SmartSwitch 9W006 User Manual page 216

USER'S GUIDE
host IP address
IP address using dotted decimal notation for the target host.
timeout
Optional parameter that indicates the number of seconds to wait for an ICMP Echo Reply
Message. The valid range for the time out value is 1 to 60. The default value is 10.
/dnnnn
Optional parameter that indicates the data size in bytes for the ICMP Echo message. The valid
range for the data size value is 0 to 2020. The default value is 0.
Possible Results and their meanings:
ddd.ddd.ddd.ddd is alive
The valid ICMP Echo Reply was received from host ddd.ddd.ddd.ddd.
No response from ddd.ddd.ddd.ddd
No response was received from the host within the timeout value number of seconds.
ip rip interface
Displays information pertaining to the interface data that is maintained by the IP RIP protocol.
The example screen below illustrates the interface information that will be displayed when this
command is entered.
[System Name]> ip rip interface
Status:
I/F Type:
IP Address:
Subnet Mask:
Broadcast Address:
Transmission:
Reception:
Query Response:
Version 2 Authentication: Password
Status:
I/F Type:
IP Address:
Subnet Mask:
Broadcast Address:
Host Route Propagation:
Status:
I/F Type:
IP Address:
Subnet Mask:
Broadcast Address:
Host Route Propagation:
ip rip routes
Displays information pertaining to the routing table(s) that are maintained by the IP RIP
protocol. The following example screen illustrates the output from this command. Following
the table is an explanation of the fields displayed for each route.
216 SmartSwitch Remote Access Module
Active
LAN
192.168.1.1
255.255.255.0
192.168.1.255
Version 1
Version 1 or Version 2
Version 1
Inactive
WAN - UNNUMBERED
0.0.0.0 (left.CSX)
N/A
255.255.255.255
N/A
Inactive
WAN - NUMBERED
192.168.3.5
255.255.255.0
255.255.255.255
When host connected