Cabletron Systems SmartSwitch 9W006 User Manual page 119

Cannot make Bridge Dial Out call. No device found.
Check configuration to insure that device is properly configured.
Can only do SPEECH and 3.1K AUDIO calls in HOST_CALL_REQUEST
An improper outgoing call was attempted on an RBS line. Ensure that the device that is being called
is a digital modem device and ensure that the "dm" flag has been added to peer calls.
Can't call Dial Out User. Security is not Device Level.
Check configuration. Bridge Dial Out requires device-level security and a properly configured
Device List.
Can't start offnode server lookup of Dial Out User.
SmartSwitch Remote Access Module unable to send out a request to the off-node server. One of two
possibilities: there may be problems communication on the LAN, or the server may not be
configured properly. Verify LAN connectivity with server, and then check to see if server
configured properly.
Calls Active
xx Active Sites
Current number of sites connected.
Calls Active
xxx to <sitename>
Bandwidth to each site.
Capability description processing error - <caperror>.
System is in minimal configuration mode.
A problem has occurred during system installation. The <caperror> will further identify the
problem:
• File not found
• Could not open file
• File already exists
• Header corruption
• File write problem
• Hash key mismatch
• Invalid serial number
• Invalid capability type
• Invalid capability format
• Invalid capability value
The system will come up in a minimal capability mode, allowing only one physical connection, one
X.25 virtual connection, and one Frame Relay virtual connection. Contact your Distributor or
Customer Support.
Note: Duplicating serial numbers on all systems is a license violation.
S M
YSTEM ESSAGES
System Message Summary
9W006 and 9W007 119