Cabletron Systems SmartSwitch 9W006 User Manual page 129

S M
YSTEM ESSAGES
System Message Summary
Error initializing WAN card: <WAN card Id>
The system could not initialize the specified WAN card during system initialization. Check the
WAN card installation and configuration. If the error continues, report the problem.
Error parsing old WAN (Direct Host) interface: LAN interface <LAN netif name> for specified port <port# >
already in use
This error may display after upgrading software which contains secondary IP addressing and an
"old" style WAN (Direct Host) interface. To correct, use SFVRA-CFG to delete any WAN (Direct
Host) interfaces on the problematic LAN port, and reconfigure them.
Error parsing old WAN (Direct Host) interface: no LAN interface for specified port <port# >
This error may display after upgrading software which contains secondary IP addressing and an
"old" style WAN (Direct Host) interface. To correct, use SFVRA-CFG to delete the problematic
WAN (Direct Host) interface. Afterwards, configure a LAN interface and then read the WAN
(Direct Host) interface.
Error parsing WAN (Direct Host) interface: no LAN interface for specified name <name>
The LAN network interface associated with this WAN (Direct Host) interface is not present. Use
SFVRA-CFG to delete the problematic WAN (Direct Host). Check configuration for the suspect
LAN interface; it most likely will not be there. Add LAN interface, then reconfigure the WAN
(Direct Host) interface.
Error opening file \system\ethernt2.bin
The LAN adapter executable file could not be opened. Check for proper software installation.
Error programming adapter # 'x' hardware
The WAN card initialization subsystem encountered an error while attempting to program the
hardware on the indicated adapter. Restart the system and review the configuration for the
adapter. If the problem persists, the indicated adapter card may be faulty; contact your Distributor
or Customer Support.
Error reading file <file name>, section = <section name>
If seen repeatedly, the above message indicates a problem with your file system. Contact your
Distributor or Customer Support.
Error reading file \system\ethernet2.bin,section = <file type>
The specified section of the LAN adapter executable file could not be read. Check for proper
software installation.
Error reading platform type: couldn't open file C:\SYSTEM\PLATFORM.NEI
Error reading platform type: error reading C:\SYSTEM\PLATFORM.NEI
Error reading platform type: there is no "plat name" field
Error reading platform type: there was no "=" in the string
Error reading platform type: type value is too large
Error reading platform type: type was not converted to an int
There is a problem with the platform.nei file. Reinstall the system Installation/Upgrade diskettes
or CD-ROM.
Error reading sdconf.rec file
An error occurred during parsing of the ACE configuration file. The file was found, but did not
have the expected format. Either repeat the download of the file from the ACE server, or reenter
the ACE database location configuration using SFVRA-CFG.
9W006 and 9W007 129