Cabletron Systems SmartSwitch 9W006 User Manual page 275

Dec Value Hex Value
34 22
35 23
37 25
38 26
39 27
40 28
41 29
42 2A
43 2B
44 2C
45 2D
46 2E
47 2F
49 31
50 32
51 33
Q.931 Cause
no circuit/channel available
Indicates that the connection could not be established because there
was no appropriate channel available to handle the call.
destination unattainable
degraded service
network (WAN) out of order
Indicates that the destination could not be reached because the
network was not functioning correctly and that the condition is
expected to last for a relatively long time. An immediate re-connect
attempt is likely to be unsuccessful.
transit delay range cannot be achieved
throughput range cannot be achieved
temporary failure
Indicates that an error has occurred because the network is not
functioning correctly, but that this problem is likely to be resolved
shortly.
switching equipment congestion (network congestion)
Indicates that the destination could not be reached because the
network switching equipment was temporarily overloaded.
access information discarded
Indicates that the network could not provide the requested access
information.
requested circuit/channel not available
Indicates that the remote equipment could not provide the requested
channel for an unspecified reason. This may, or may not, be a
temporary problem.
preempted
precedence call blocked
resource unavailable, unspecified
Indicates that the requested channel or service was unavailable for
an unspecified reason. This may, or may not, be a temporary
problem.
quality of service unavailable
Indicates that the requested quality of service (as defined by CCITT
recommendation X.213) could not be provided by the network. This
may be a subscription problem.
requested facility not subscribed
Indicates that the remote equipment supports the requested
supplementary service but that this is available only by subscription.
reverse charging not allowed
C C T
AUSE ODES ABLE
9W006 and 9W007 275