Cabletron Systems SmartSwitch 9W006 User Manual page 160

USER'S GUIDE
[TFTP] Local warning # 21 All sessions in use
All of the allowed TFTP sessions are currently in use. No file transfer will be attempted. (TFTP
client console message only; not logged on System.)
[TFTP] Local warning # 26 TFTP Session Killed
The TFTP session was terminated by the network administrator via issuing the TFTP kill
<session Id> console command.
Note: For the following [TFTP] Remote error messages the Remote Host TFTP Servers/Client
will map error messages within the types shown below. The text portion of each message
may vary with each Host transmitting the message.
[TFTP] Remote error # 0: (Text from Remote Host)
Undefined error. The accompanying text (if any) should describe the error. The file being
transferred may be corrupted.
[TFTP] Remote error # 1: (Text from Remote Host)
The REMOTE HOST could not find the file specified on its system. No file transfer will be
attempted.
[TFTP] Remote error # 2: (Text from Remote Host)
The REMOTE HOST is reporting an access violation of the specified file. No file transfer will be
attempted.
[TFTP] Remote error # 3: (Text from Remote Host)
The REMOTE HOST is reporting that its disk is full. The file being transferred may be corrupted.
[TFTP] Remote error # 4: (Text from Remote Host)
The REMOTE HOST is reporting that it received a TFTP packet that it was not expecting. The file
being transferred may be corrupted.
[TFTP] Remote error # 5: (Text from Remote Host)
The REMOTE HOST is reporting that it was not expecting a packet from our system. The file being
transferred may be corrupted.
[TFTP] Remote error # 6: (Text from Remote Host)
The REMOTE HOST is unable to overwrite the specified file. No file transfer will be attempted.
[TFTP] Remote error # 7: (Text from Remote Host)
This message indicates that the specified device does not exist. This error should not occur since
TFTP does not use Device Ids.
[TFTP} Server UDP port (69) closed successfully
Informational message stating that the TFTP server UDP port was successfully closed.
[TFTP} Server UDP port (69) opened successfully
Informational message stating that the TFTP server UDP port was successfully opened.
[TFTP] Unable to allocate data buffers
The entire TFTP feature (both Server and Client) was not initialized. Contact your Distributor or
Customer Support.
160 SmartSwitch Remote Access Module