Carbon Copy - Cabletron Systems SmartSwitch 9W006 User Manual

USER'S GUIDE
C C
ARBON OPY
WAN
MMAC PLUS
C a b l e t r o n
Systems
The Carbon Copy feature gives you complete remote management. Any command that you can
issue on a local console session can be issued with Carbon Copy. Files can also be transferred
between the Manager PC and the SmartSwitch Remote Access Module.
The disadvantage of using Carbon Copy is that a separate telephone line must be connected to each
SmartSwitch Remote Access Module being managed. Another disadvantage is that the Manager
PC must be an AT compatible PC.
I C
NSTALLATION AND
When using the Modem Remote Administration Console, the connection to the SmartSwitch
Remote Access Module is done using standard modems. Modems and cables are NOT provided
with the SmartSwitch Remote Access Module.
When an SmartSwitch Remote Access Module is delivered, Carbon Copy is configured for a Direct
Remote Administration Console. To set your system up for a Modem Remote Administration
Console, you must reconfigure Carbon Copy's baud rate and modem type parameters. Instructions
for changing these parameters are listed below.
C CARBON COPY C
HANGING
The Carbon Copy CCINSTAL program is available on the SmartSwitch Remote Access Module and
on the Manager diskette. (The diskette is available as an option when you order your SmartSwitch
188 SmartSwitch Remote Access Module
Modem
MMAC-Plus with
SmartSWITCH
Remote Access Module
LAN
ONFIGURATION
ONFIGURATION
Phone Company
P
ARAMETERS
Modem