Cabletron Systems SmartSwitch 9W006 User Manual page 114

USER'S GUIDE
[AUTH] RADIUS CHAP rejected for device: <device name>
The remote Authentication server rejected the CHAP mode authentication request for the indicated
device. This usually indicates that one of the following has occurred:
1. The <device name> is not in the remote Authentication server's database.
2. The device's CHAP response was not calculated properly.
3. The device's SECRET does not match the secret in the RADIUS server's database.
4. The RADIUS server's database entry for this device contains errors.
[AUTH] RADIUS HDLC BRIDGE rejected bridge address: <mac address>
The remote Authentication server rejected the bridge address. This indicates that one of the
following has occurred:
1. The <mac address> is not in the remote Authentication server's database.
2. The <mac address> is entered incorrectly in the remote Authentication server's database.
[AUTH] RADIUS INTERFACE LOOKUP rejected name <interface name>
The remote Authentication server route lookup feature rejected the interface name. This indicates
that one of the following has occurred:
1. The < interface name> is not in the remote Authentication server's database.
2. The < interface name > is entered incorrectly in the remote Authentication server's database.
[AUTH] RADIUS IP HOST rejected IP Host id: <IP host Id>
The remote Authentication server rejected the IP Host id. This indicates that one of the following
has occurred:
1. The <IP Host Id> is not in the remote Authentication server's database.
2. The <IP Host Id> is entered incorrectly in the remote Authentication server's database.
[AUTH] RADIUS IP RESOLVE rejected IP Address: <IP address>
The remote Authentication Server rejected the IP Address Resolution authentication request for the
indicated IP Address. This usually indicates that one of the following has occurred:
1. The <IP Address> is not in the remote Authentication server's database.
2. The Authentication server's database entry for this IP Address contains errors.
[AUTH] RADIUS LOGIN rejected device: <device name>
The remote Authentication server rejected the named device. This indicates that one of the
following has occurred:
1. The <device name> is not in the remote Authentication server's database.
2. The <device name> is entered incorrectly in the remote Authentication server's database.
114 SmartSwitch Remote Access Module