Dial Out - Cabletron Systems SmartSwitch 9W006 User Manual

Action:
The Community Name specified in the request PDUs does not have the proper access rights to
perform the desired request. Use SFVRA-CFG to change the MIB access level of the indicated
Community Name to the desired access level or change the configuration of your Network
Management Station so that it uses a Community Name that has the desired MIB access level.
To change a MIB access level:
1. If it is not already running, start up SFVRA-CFG.
2. From the toolbar, select Functions then select SNMP or click the
3. Double click on the SNMP Management Group that the site is associated with.
4. Click on the Communities tab.
5. Since you cannot edit the MIB access level for a previously configured Community Name, you
will need to delete the Community Name, and then add it back with a corrected access level.
To do this:
a. Select the Community Name in question, then click on Delete.
b. Click on Add, then enter the new Community Name and the corrected associated MIB Access
Level. Click on Add.
6. If you made any changes, download the new configuration files to the site.
For more detailed instructions, refer to the following sections in the SFVRA Configuration Manager
User's Guide:
• For SNMP MIB access level information: refer to Configuring SNMP Management Group
Communities in the Configuring SNMP Management Groups chapter.
• For downloading configuration files: refer to Downloading Configuration Updates in the
Exporting Configuration Files chapter.
D O
IAL UT
Problem:
A Dial Out call was not completed successfully.
Action:
1. If you issued the call device <device name> console command to initiate the call, check
to see that you entered the device name correctly. Device names are case sensitive.
2. If you issued the call peer <telephone number data rate> console command to
initiate the call, check to see that you entered the correct telephone number and data rate. The
telephone number must contain all required prefixes such as the area code, or a "9" if Centrex
is used.
P D
ROBLEM IAGNOSIS

Dial Out

icon.
9W006 and 9W007 105