Rip Statistics; Rip Global Statistics; Rip Interface Statistics - Cabletron Systems SmartSwitch 9W006 User Manual

USER'S GUIDE
RIP S
TATISTICS
You can access RIP statistics by using the ip rip stats console command. Global RIP statistics
and statistics for each configured RIP interface are included.
RIP G S
LOBAL TATISTICS
GlobalRouteChanges
The number of route changes made to the IP route database by RIP. This does not include the
refresh of a route's age.
GlobalQueries
The number of responses sent to RIP queries from other systems.
RIP I S
NTERFACE TATISTICS
The following set of RIP interface statistics are displayed for each configured RIP interface.
IfStatAddress
The IP address of this system on the indicated RIP interface. For unnumbered interfaces, the value
0.0.0.N, where the last signification 24 bits (N) is the index for the IP interface in network byte order.
IfStatRcvBadPackets
The number of RIP response packets received by the RIP process which were subsequently
discarded for any reason. Example reasons include: a version 0 packet, or an unknown command
type.
IfStatRcvBadRoutes
The number of routes, in valid RIP packets, which were ignored for any reason. Example reasons
include: an unknown address family, or an invalid metric.
IfStatRcvRequests
The number of RIP messages with 'request' command code received on this interface.
IfStatRcvResponses
The number of RIP messages with 'response' command code received on this interface.
IfStatSentRequests
The number of RIP messages with 'request' command code sent on this interface.
IfStatSentResponses
The number of RIP messages with 'response' command code sent on this interface.
IfStatSentUpdates
The number of triggered RIP updates actually sent on this interface. This explicitly does NOT
include full updates sent containing new information.
254 SmartSwitch Remote Access Module