Cabletron Systems SmartSwitch 9W006 User Manual page 214

USER'S GUIDE
C I
OMPRESSION NFORMATION
Compression statistics are only available for connections that are using a compression protocol.
The following commands are used to display current compression information:
cmp stats
Displays the compression statistics for all active connections. Refer to
a list of available compression statistics and their definitions.
cmp stats <device name>
Displays the compression statistics for the indicated device. Refer to
a list of available statistics and their definitions. Note that the device name is case sensitive.
cmp clear <device name>
Clears the compression statistics for the indicated device. If the device name is omitted, no
compression statistics will be cleared. Note that the device name is case sensitive.
cmp clearall
Clears the compression statistics for all devices.
D M C
IGITAL ODEM
These commands allow you to display active connections, display or erase digital modem statistics,
add or delete individual modems and upgrade modem firmware when necessary.
modem add <slot #> <modem #>
Adds a previously-deleted modem back to the available list for devices (i.e., after testing).
modem delete <slot #> <modem #>
Deletes a modem from the available list for devices. This command is useful in the event you
have a faulty modem and wish to temporarily disable it for troubleshooting purposes. Use this
command in conjunction with the modem add and modem status commands.
modem reset <slot #> <modem #>
Resets the specified DM-24 or DM-30 modems on a particular slot. Does not affect other
modems on the board. A modem currently in use cannot be reset. DM-8 modems cannot be
reset.
modem restart <slot #>
Restarts the digital modem board (i.e., if an unrecoverable problem occurs). This command
does not affect any other boards within the system.
modem stats <slot #><modem #>
Displays the digital modem statistics associated with the specified modem. For a listing of
available statistics and their definitions, refer to
modem stats clear <slot #><modem #>
Clears the digital modem statistics associated with the specified modem.
214 SmartSwitch Remote Access Module
C
OMMANDS
OMMANDS
Compression
Compression
Digital Modem Statistics.
Statistics, for
Statistics, for