Cabletron Systems SmartSwitch 9W006 User Manual page 276

USER'S GUIDE
Dec Value Hex Value
52
53
54
55
56
57
58
59
61
63
65
66
67
68
69
70
79
276 SmartSwitch Remote Access Module
Q.931 Cause
34 outgoing calls barred
35 outgoing calls barred within CUG
36 incoming calls barred
37 incoming calls barred within CUG
38 call waiting not subscribed
39 bearer capability not authorized
Indicates that the device has requested a bearer capability that the
network is able to provide, but that the device is not authorized to
use. This may be a subscription fault.
3A bearer capability not presently available
Indicates that the network is normally able to provide the requested
bearer capability, but not at the present time. This may be a
temporary network problem or a subscription problem.
3B device busy 1TR6
3E call rejected 1TR6
3F service or option not available, unspecified
Indicates that the network or remote equipment was unable to
provide the requested service option for an unspecified reason. This
may be a subscription problem.
41 bearer service (or capability) not implemented
Indicates that the network is not capable of providing the bearer
capability requested by the device.
42 channel type not implemented
Indicates that the network or the destination equipment does not
support the requested channel type.
43 transit network selection not implemented
44 message not implemented
45 requested facility not implemented
Indicates that the remote equipment does not support the requested
supplementary service.
46 only restricted digital information bearer capability is available
Indicates that the network is unable to provide unrestricted digital
information bearer capability.
4F service or option not implemented, unspecified
Indicates that the network or remote equipment was unable to
provide the requested service option for an unspecified reason. This
may be a subscription problem.