Sfvra Configuration Manager; Starting The Sfvra-Cfg Application - Cabletron Systems SmartSwitch 9W006 User Manual

USER'S GUIDE
you use SFVRA-CFG to download configuration files, the files will be over written and the system
will reboot. The CFGEDIT or Dynamic Management session will be canceled, and any changes,
unsaved or saved, will be lost.
With two exceptions, it is possible to completely configure your system using CFGEDIT. The
exceptions are:
1. TFTP configuration
2. file attributes configuration
These two elements can only be configured using Manage Mode.
SFVRA C
ONFIGURATION
The SFVRA Configuration Manager allows a network to be configured and managed centrally. It
is made up of two components: the SFVRA-CFG database (using either MS SQL Server, or MS
Access) and the SFVRA-CFG client application, which is the interface to the database.
The network administrator can generate each system's configuration files separately, with the
system's view of the network, then transfer the configuration files electronically to the system.
SFVRA-CFG provides a mechanism to define a system at a site, based on administrator-defined
templates and standard configurations. It also allows the definition of major protocol networks and
their ISDN lines, mapping them to specific sites and then to systems at that site. The configuration
files generated by SFVRA-CFG for a specific system can be transferred to that system using a
proprietary, secure protocol. For more information on SFVRA-CFG, including installation and
configuration instructions, refer to SFVRA Configuration Manager User's Guide.
S SFVRA-CFG A
TARTING THE
To start the SFVRA-CFG:
1. Open the SFVRA-CFG application.
3. From the menu bar, click on File then click on Connect, or click
4. A dialog box similar to the following will be displayed:
Note that the first time you use the SFVRA-CFG application, the login ID is set to SFVRACFG.
If desired, you may edit this field to change the login ID.
5. If required, enter your password.
6. Click OK.
36 SmartSwitch Remote Access Module
M
ANAGER
PPLICATION
on the toolbar.