Cabletron Systems SmartSwitch 9W006 User Manual page 159

Remote access module
Hide thumbs Also See for SmartSwitch 9W006:
Table of Contents

Advertisement

S
M
YSTEM
ESSAGES
System Message Summary
[TFTP] Local error # 8: No route defined <filename>
The TFTP protocol was instructed to start a TFTP session with an IP ADDRESS (HOST) for which
there is no defined route. There may be a problem with the specified file; try replacing it. If this
message appears consistently, contact your Distributor or Customer Support.
[TFTP] Local error # 9: File transfer timed out <filename>
The TFTP file transfer timed out. There may be a problem with the specified file; try replacing it. If
this message appears consistently, contact your Distributor or Customer Support.
[TFTP] Local error # 10: IP addressing inconsistency detected
The TFTP protocol received a packet from a host for which no file transfer was being processed.
This should not affect any files being transferred.
[TFTP] Local error # 11: Received packets out of sequence <filename>
The TFTP protocol received a data packet that either was too old or one was skipped. There may
be a problem with the specified file; try replacing it. If this message appears consistently, contact
your Distributor or Customer Support.
[TFTP] Local error # 12: Bad packet length received <filename>
The TFTP protocol received a packet that was too big. There may be a problem with the specified
file; try replacing it. If this message appears consistently, contact your Distributor or Customer
Support.
[TFTP] Local error # 13: Received unexpected opcode <filename>
The TFTP protocol received a packet that was not expected. There may be a problem with the
specified file; try replacing it. If this message appears consistently, contact your Distributor or
Customer Support.
[TFTP] Local error # 14: Bad file name
The local file (as defined from a remote host) was not recognized as a valid file name. No file
transfer will be attempted.
[TFTP] Local error # 15: Bad mode string
The TFTP mode string was not NETASCII nor OCTET. No file transfer will be attempted.
[TFTP] Local error # 17: Unable to locate file/directory <filename>
The file system was unable to locate the file requested. No file transfer will be attempted.
[TFTP] Local error # 18: Unable to open file <filename>
Either the file does not exist or the device (Client or Server) does not currently have access to this
file. No file transfer will be attempted.
[TFTP] Local error # 19: Disk full <filename>
The local disk became full during the TFTP file transfer. There may be a problem with the specified
file; try replacing it. If this message appears consistently, contact your Distributor or Customer
Support.
[TFTP] Local error # 20: Error while writing file <filename>
An error occurred while writing to a file. The file may be corrupted and must be replaced.
9W006 and 9W007
159

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartswitch 9w007

Table of Contents