System Statistics; Overview; Connectivity Statistics - Cabletron Systems SmartSwitch 9W006 User Manual

S S
YSTEM TATISTICS
O
VERVIEW
Statistics can either be generated by issuing the ds command to display the set of statistics known
as the System Statistics, or by issuing a specific command to display statistics in a specific category.
In addition to using the ds command to display the system statistics, they are also automatically
written to a statistics log every 30 minutes. The statistics are stored in the following location:
Directory:
File Name:
("nn" is an integer that is incremented each time a new file is written.
You may display these log files using DOS commands. For example, to display the statistics log
with the extension of 10, you could enter the following command at the DOS prompt:
C:\> type \log\stat_log.10|more
Note: The log extensions are revolving numbers. When your machine first begins operating, the
files will progress from the .01 extension to the .10 extension. After that time, the oldest
report (.01) would be replaced with the latest report. To make sure you are viewing the log
file you wish to see, issue a DOS dir command of the log directory to display the time that
each log file was written to disk.
The first set of statistics, System Statistics, are arranged by function. These are:
•

connectivity statistics

• call restriction statistics
• call statistics
• throughput monitoring statistics
The rest of the statistics are arranged in alphabetical order. These statistics pertain to specific
features. The statistics you choose to display will depend on which system options you have
enabled. These statistics provide valuable information.
C S
ONNECTIVITY
You can access Network Connectivity statistics by issuing the ds console command.
ISDN_Re-try
Retry count for re-establishing the data link after it fails.
ID_Re-try
Retry count for exchanging identification messages with a remote SmartSwitch Remote Access
Module.
ID_Fail
Failure count for exchanging identification messages with a remote SmartSwitch Remote Access
Module.
\log
stat_log.nn
TATISTICS