Digital Modem Statistics; Lan Statistics; Ip Statistics - Cabletron Systems SmartSwitch 9W006 User Manual

D M S
IGITAL ODEM
If you are using a Digital Modem, you can access the following statistics by using the modem
stats command:
pkts rcvd
Total number of packets received over the modem connection.
pkts xmit
Total number of packets transmitted over the modem connection.
fcs errors
Total number of HDLC frames discarded because of Frame Checksum (FCS) errors.
LAN S
TATISTICS
You can access LAN statistics by issuing the lan stats console command.
pkts rcvd
The total number of packets received on the LAN port.
rcv overruns
The number of frames known to be lost because the local system bus was not available. If the traffic
problem persists for more than one frame, the frames that follow the first are also lost; however,
because there is no lost frame indicator they are not counted.
crc errors
The number of aligned frames discarded because of a CRC error.
align errors
The number of frames that are both misaligned and contain a CRC error.
resource errors
The number of good frames discarded because there were no resources available.
pkts xmit
The number of packets transmitted on the LAN port.
xmit errors
The number of packets transmitted with errors on the LAN port.
IP S
TATISTICS
You can access IP statistics by using the ip stats console command. These statistics are parts of
the IP Group and the ICMP Group MIB variables that are defined in RFC-1213:MIB-II.
TATISTICS
S S
YSTEM TATISTICS

Digital Modem Statistics

9W006 and 9W007 245