Cabletron Systems SmartSwitch 9W006 User Manual page 248

USER'S GUIDE
icmpInParmProbs
The number of ICMP Parameter Problem messages received.
icmpInSrcQuenchs
The number of ICMP Source Quench messages received.
icmpInRedirects
The number of ICMP Redirect messages received.
icmpInEchos
The number of ICMP Echo (request) messages received.
icmpInEchoReps
The number of ICMP Echo Reply messages received.
icmpInTimestamps
The number of ICMP Timestamp (request) messages received.
icmpInTimestampReps
The number of ICMP Timestamp Reply messages received.
icmpInAddrMasks
The number of ICMP Address Mask Request messages received.
icmpInAddrMaskReps
The number of ICMP Address Mask Reply messages received.
icmpOutMsgs
The total number of ICMP messages that this system attempted to send. Note that this counter
includes all those counted by icmpOutErrors.
icmpOutErrors
The number of ICMP messages that this system did not send due to problems discovered within
ICMP, such as a lack of buffers. This value should not include errors discovered outside the ICMP
layer such as the inability of IP to route the resultant datagram. In some implementations there may
be no error types that contribute to this counter's value.
icmpOutDestUnreachs
The number of ICMP Destination Unreachable messages sent.
icmpOutTimeExcds
The number of ICMP Time Exceeded messages sent.
icmpOutParmProbs
The number of ICMP Parameter Problem messages sent.
icmpOutSrcQuenchs
The number of ICMP Source Quench messages sent.
icmpOutRedirects
The number of ICMP Redirect messages sent. For a host, this will always be zero, since hosts do not
send redirects.
248 SmartSwitch Remote Access Module