Verifying Lan Connection Is Operational; Verifying Bridge Is Initialized - Cabletron Systems SmartSwitch 9W006 User Manual

Remote access module
Hide thumbs Also See for SmartSwitch 9W006:
Table of Contents

Advertisement

Depending on the resource switch type, the system will delay up to 2 minutes before
attempting to bring up the data links.
Note:
Other messages may also be displayed with the line initialization messages.
If this message is displayed for each configured line, then the WAN lines are available for use.
If the line initialization message for a configured line is NOT displayed, refer to
Availability
V
LAN C
ERIFYING
To verify the operation of the LAN connection, the Ethernet LAN adapter resource must already
be operational.
To verify the operation of the LAN connection:
1.
Connect the SmartSwitch Remote Access Module to the SmartSwitch 9000's properly
terminated Ethernet LAN connection.
2.
Transmit a test packet onto the Ethernet LAN. At the administration console type:
lan test <return>
This command will display a message similar to the following:
LAN port 1 Transmit was successful
If the system displays this message, then the test packet was transmitted correctly.
If this message IS NOT displayed, then the LAN connection failed. Refer to
the Problem Diagnosis chapter.
V
B
ERIFYING
RIDGE IS
To verify that bridging has initialized properly:
1.
Determine if the bridge is in the forwarding state by viewing the system messages. At the
administration console type:
dr <return>
2.
The dr command displays the current system messages. Look for the following LAN adapter
messages among the system messages:
LAN Port <port #> is now in the LISTENING state
LAN Port <port #> is now in the LEARNING state
LAN Port <port #> is now in the FORWARDING state
Note:
Other messages may also be displayed with these LAN messages.
If you see these bridge initialization messages, then bridging is operational. If these bridge
initialization messages are NOT displayed, refer to
chapter.
in the Problem Diagnosis chapter.
O
ONNECTION IS
PERATIONAL
I
NITIALIZED
S

Verifying LAN Connection is Operational

Bridge Initialization
in the Problem Diagnosis
9W006 and 9W007
V
YSTEM
ERIFICATION
WAN Line
LAN Attachment
in
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartswitch 9w007

Table of Contents