Cabletron Systems SmartSwitch 9W006 User Manual page 115

[AUTH] RADIUS PAP rejected device: <device name>
The remote Authentication server rejected the PAP mode authentication request for the indicated
device. This usually indicates that one of the following has occurred.
1. The <device name> is not in the remote Authentication server's database.
2. The device's PASSWORD did not match the password in the RADIUS server's database.
3. The RADIUS server's database entry for this device contains errors.
[AUTH] RADIUS ROUTE LOOKUP rejected IP address: <IP address>
The remote Authentication server route lookup feature rejected the IP address. This indicates that
one of the following has occurred:
1. The <IP address> is not in the remote Authentication server's database.
2. The <IP address> is entered incorrectly in the remote Authentication server's database.
[AUTH] Security data buffer allocated successfully
The Authentication agent was able to allocate and initialize all memory required to perform
authentication requests.
[AUTH] Security data buffer allocation failed
The Authentication agent was not able to allocate and initialize all memory required to perform
authentication requests. No authentication request will be attempted. Contact your Distributor or
Customer Support.
[AUTH] TACACS LOGIN rejected user: <user name>
The remote Authentication server rejected the named user. This indicates that one of the following
has occurred:
1. The <user name> is not in the remote Authentication server's database.
2. The <user name> is entered incorrectly in the remote Authentication server's database.
[AUTH] TACACS No server configured for designated database location.
TACACS is configured as a database location for security authentication. Either no TACACS server
has been configured or an error occurred when parsing the TACACS server configuration.
[AUTH] Warning code: 0001 Timeout
The configured authentication server(s) did not respond to requests for user authentication. Either
the authentication server is not up and running, or it cannot access the IP address.
[AUTH] Warning code: 0002 Missing required attribute from server
The response message from the authentication server did not provide all required attributes for
user authentication. The attributes required vary, depending on type of service, and type of
security. Refer to the RADIUS Authentication Server User's Guide for details. Then check user
entry for all required attributes.
[AUTH] Warning code: 0003 No UDP buffer available
Internal resources were not available to send/receive an authentication message. Contact your
Distributor or Customer Support.
S M
YSTEM ESSAGES
System Message Summary
9W006 and 9W007 115