Performing A File Transfer Using Carbon Copy - Cabletron Systems SmartSwitch 9W006 User Manual

USER'S GUIDE
4. Choose "
Return to Application
Press: <F10>

Performing a File Transfer Using CARBON COPY

After a successful Carbon Copy logon, the lower right hand corner may contain the Carbon Copy
menu. If the menu is not present, display it by pressing the <ALT> and <RIGHT SHIFT> keys
simultaneously.
[F1]
[F2]
[F3]
[F4]
[F5]
[F6]
[F7]
[F8]
[F10]
To initiate the File Transfer Program, press the function key <F5>.
The file transfer facility will display a one page tutorial. The administration console PC is
considered the LOCAL PC. The SmartSwitch Remote Access Module is considered the HOST. To
copy files, you issue a command similar to a standard MSDOS copy command and supply the
proper prefix to the file paths. For example:
COPY LC:NETWORK.NEI HC:\CONFIG\NETWORK.NEI
where:
L=Local
H=Host
This command will copy the NETWORK.NEI file from the current directory on the administration
consoles PC's C: drive to the SmartSwitch Remote Access Module's C:\CONFIG directory. This
downloads files from the administration console PC to the SmartSwitch Remote Access Module. To
retrieve files such as system logs from the SmartSwitch Remote Access Module, simply reverse the
copy procedure.
If you find you need to create subdirectories, rename files, type documents, or other similar file
manipulations, you can do so without leaving Carbon Copy. The file transfer facility offers DOS
command equivalents to RENAME, TYPE, MKDIR, DIR, and several other popular file
manipulation commands. Simply type HELP at the prompt to get more information.
After you finish copying files and want to log-off, select Terminate Link from the command menu.
Press: <F1>.
Then select Return to Application from the command menu. Press <F10>. This will return you to
the DOS prompt.
192 SmartSwitch Remote Access Module
" from the Carbon Copy command menu. Press:
Terminate Link
Switch Voice to Data Mode
Capture Screen/Session
Review/Replay Captured Image
File Transfer Program
Printer/LOG/DOS Control
Terminal Emulation
Data Link Maintenance
Return to Application