Cabletron Systems SmartSwitch 9W006 User Manual page 268

A
DMINISTRATIVE
The following table lists all system administration commands. Guest commands are identified in
the command column.
Command
?
atalk arp
atalk ping <dnet>.<dnode>
{timeout/dnnn]
example:
atalk ping 1.3 30 /d200
atalk port
atalk port stats [clear]
atalk route
atalk stats
atalk stats atp
atalk stats ddp
atalk stats echo
atalk stats nbp
atalk stats rtmp
atalk stats zip
atalk zone
br stats
br stats clear
br stpbrdg
br stpport <port # >
call peer
<phone number> [data rate]
call device <device name>
cls
C C
ONSOLE OMMANDS
Use
(GUEST) displays help screen
displays the AARP cache
pings a specified device, where:
dnet = destination network number (required)
dnode = destination node ID (required)
timeout = seconds to wait for reply (optional)
nnn = data size included in ping packet (optional)
displays AppleTalk port information
displays or clears current AppleTalk port statistics
displays AppleTalk static route information
displays all six groups of current AppleTalk statistics
the commands below display individual group statistics
displays current AppleTalk ATP statistics
displays current AppleTalk DDP statistics
displays current AppleTalk AEP statistics
displays current AppleTalk NBP statistics
displays current AppleTalk RTMP statistics
displays current AppleTalk ZIP statistics
displays AppleTalk zone information
displays current packet statistics
clears current packet statistics
displays Spanning Tree bridge information
displays Spanning Tree information for the specified port
calls a device at the given phone number, data rate is
optional
calls the specified device
(GUEST) clears administration screen
T
ABLE