Ip Routing Over Awan Rlan Interface Connection - Cabletron Systems SmartSwitch 9W006 User Manual

USER'S GUIDE
If the remote Host is unable to access the LAN interface, refer to the preceding problem and
associated actions.
2. Verify that the local IP Host has the route entry for the remote network with the SmartSwitch
Remote Access Module as the next hop.
If the local IP Host has the proper route entry to the remote network, refer to
Over a LAN Connection
If the local IP Host does not have the proper route entry, make corrections to the local IP Host
configuration.
IP R O
OUTING VER A
Problem:
The remote IP Host connected to a WAN RLAN interface on the SmartSwitch Remote Access
Module does not receive a ping response from the SmartSwitch Remote Access Module WAN
RLAN interface.
Action:
1. Verify that the WAN connection is up. Use the mc console command to display the Monitor
Connections screen. Check for the connection. If the connection is up, then continue with the
next step.
If the connection is not up, refer to
2. Verify that the WAN RLAN interface is properly initialized. Use SFVRA-CFG to check for the
proper WAN RLAN interface (refer to
interface exists, then continue with the next step.
If the proper interface does not exist, use SFVRA-CFG to make the necessary corrections.
3. Check that the IP address configured for the IP Host device matches the address configured on
the IP Host device. Make corrections to the SmartSwitch Remote Access Module's
configuration (using SFVRA-CFG), or to the IP Host's configuration, as required. To do this,
follow the instructions outlined on
Problem:
The remote IP Host connected to a WAN RLAN interface on the SmartSwitch Remote Access
Module does not receive a ping response from the SmartSwitch Remote Access Module LAN
interface.
Action:
1. Verify that the remote IP Host can access the WAN RLAN interface of the SmartSwitch Remote
Access Module. If this can be done successfully, continue with the next step.
If the remote IP Host is not able to access the WAN RLAN interface, then refer to the preceding
problem and action.
86 SmartSwitch Remote Access Module
in the System Verification chapter.
WAN RLAN I
NTERFACE
Remote Device
page
C
ONNECTION
Connectivity.
page 77 for instructions). If the proper WAN RLAN
84.
Verify IP Routing