Layer 1 General Statistics; Wan Statistics - Cabletron Systems SmartSwitch 9W006 User Manual

USER'S GUIDE
L 1 G S
AYER ENERAL
Note: Layer 1 general statistics apply to the indicated slot.
Interrupts
The number of hardware interrupts received from the layer 1 hardware device.
Forced Resynchs
The number of times layer 1 has attempted to manually synchronize to the incoming signal.
Unknown Events
If this counter is ever non-zero, call Customer Support Personnel.
Unused Events
If this counter is ever non-zero, call Customer Support Personnel.
Unknown Mail
If this counter is ever non-zero, call Customer Support Personnel.
Wrong State
If this counter is ever non-zero, call Customer Support Personnel.
WAN S
TATISTICS
You can access WAN statistics by issuing the wan stats console command.
data link up
A counter that is incremented every time a data link comes up.
data link down
A counter that is incremented each time a data link goes down.
switched call initiated
A counter that is incremented for each attempt to make a switched call.
switched call completed
A counter that is incremented each time a switched call successfully completes and passes
identification.
switched call retry
A counter that is incremented for each retry of an original switched call attempt.
switched call not possible
A counter that is incremented each time a switched call needs to be made to a site and it is not
possible.
connection request failure
A counter that is incremented each time a connection is requested and no response has been
received after a connection request failure period of time.
262 SmartSwitch Remote Access Module
TATISTICS