Cabletron Systems SmartSwitch 9W006 User Manual page 63

MMAC-Plus with
SmartSWITCH
Remote Access Module
MMAC PLUS
C a b l e t r o n
Systems
"SITE1"
To verify the operation of IP RIP output processing on a LAN interface:
1. Make sure that a static route to the network 192.1.1.0 is configured on SITE1. On SITE1's
administration console type:
ip route <return>
If the route to 192.1.1.0 is displayed continue with the next step.
If the route is NOT displayed, you will need to use SFVRA-CFG to add the static route. To do
this:
a. If it is not already running, start up SFVRA-CFG.
b. From the toolbar, select Functions, then IP Network Systems, or click on the
c. Select SITE1 from displayed list (you should have already configured IP subnet and
network interface information for this site).
d. Click on the Static Routes tab.
e. Click on Add, then follow the onscreen instructions to add a static route.
f. Download the new configuration files to SITE1.
For more detailed instructions, refer to the following sections in the SFVRA Configuration
Manager User's Guide:
• For static routes: refer to Configuring IP Network System Static Routes in the Configuring IP
Network Information chapter.
ISDN
100.0.0.1
Host A
100.0.0.2
S V
YSTEM
Verifying IP RIP
CSX150
"SITE2"
LAN 192.1.1.0
9W006 and 9W007
ERIFICATION
icon.
63