Removing The Upper Case; Disassembling The Upper Case - SELVA MARINE Grey Whale 200 EFI Service Manual

BRKT

Removing the upper case

1. Disconnect the ground lead 1 and
speedometer hose 2.
2. Remove the upper and lower mounting
nuts 3, and then remove the upper case
assembly.
NOTE:
• It is recommended to drain the engine oil
before removing the upper case.
• Be sure to remove the shift rod assembly
before removing the upper case assembly
from the clamp bracket.

Disassembling the upper case

1. Remove the engine oil drain bolt 1,
cover 2, and damper 3.
NOTE:
If the engine oil has not already been
drained, place a drain pan under the drain
hole before removing the engine oil drain bolt
1.
7-15
Bracket unit
2. Remove the upper mounts and lower
mounts from the upper case assembly.
3. Remove the oil pan assembly bolts 4
and 5, and then remove the oil pan
assembly from the upper case.
4 4
6
5
5
NOTE:
The bolt 6 is used to install the lower
exhaust guide onto the upper exhaust guide.
Therefore, if the oil pan assembly will be dis-
assembled after it is removed from the upper
case, also remove the bolt 6.
4. Remove the circlip 7, and then remove
the drive shaft bushing 8.
7
8
0
9
5
4
S6AL7240
A
0
S6AL7250
6AL3J11