Removing The Upper Case; Disassembling The Upper Case - SELVA MARINE Pike 9,9 Service Manual

BRKT

Removing the upper case

NOTE:
• Drain the engine oil before removing the
upper case assembly.
• Be sure to remove the shift rod assembly
before removing the upper case assembly
from the clamp bracket.
1. Remove the ground lead terminal 1 from
the swivel bracket.
2. Remove the mount housings 2, and
then remove the rubber dampers 3.
3. Remove the water pipe 4.
4. Remove the upper mounting nuts 5, and
then remove the upper case assembly.
1
2
3

Disassembling the upper case

1. Remove the engine oil drain bolt and
grommet.
2. Remove the upper mount 1 from the
upper case assembly.
3. Remove the oil pan assembly 2 from the
upper case 3.
7-21
Bracket unit
4
5
3
3
S6AU7018
7
1
2
3
4. Remove the oil pan 4 from the exhaust
guide 5, baffle plate 6, and gasket 7.
5. Remove the oil strainer 8 from the
exhaust guide.
6. Remove the oil seal 9 from the exhaust
guide.
5
2
9
7
4
7
7. Remove the exhaust manifold = from
the upper case 3.
S6AU7019
6 8
S6AU7023
6AU3K11