Unpacking The Equipment Rack - Qualstar XLS Series Installation Manual

3.3 Unpacking the Equipment Rack

3.3 Unpacking the Equipment Rack
All optional equipment racks are shipped in wooden crates and the unpacking
instructions for the various models are the same.
3.3.1 Removing the Equipment Rack from the Crate
To open the crate and remove the equipment rack, follow these steps:
1. Using a pair of scissors cut and remove the two nylon bands securing the crate to
the pallet. See
Figure 3-15 Equipment rack in wooden crate
2. Using a Phillips screwdriver, remove the drywall screws that attach the lid to the
top of the crate.
3. Set the lid aside and remove all of the packaging material on top of the
equipment rack.
4. Remove one layer of the foam inserts from all four sides of the equipment rack to
allow for it's removal. See
Equipment rack
Figure 3-16 Equipment rack with packaging material removed from top
3-14
Figure 3-17.
Figure 3-18.
Foam inserts
501601 Rev. 07-01-19