Qualstar XLS Series Installation Manual page 195

4. Enter basic specifications for the library, as follows:
a.
b.
Important:
c.
d.
Important:
XLS Library Installation Manual
In the Name field, enter a unique name for the new logical library. The
name can contain 5 to 32 letters and numbers. It cannot contain blanks.
In the XLS-8000 Mode field, indicate whether you want the medium
changer interface for this logical library to operate in XLS-8000 mode. When
this box is checked, the XLS reports its Product ID as XLS-8000.
To ensure proper library operation, be sure that the
XLS-8000 mode box is checked.
In the Barcode labels required field, indicate whether barcode labels are
required in this logical library. The default setting is yes (option box
checked). If you clear the Barcode labels required option, the XLS allows
both labeled and unlabeled cartridges in the logical library.
In the Checksum characters required field, indicate whether checksum
characters are required on the barcode labels used in this logical library. The
default setting is no (option box cleared). If you select the Checksum
characters required option, the XLS uses the last digit on the label as a
checksum for the other characters.
If you select the Checksum characters required
option, all labeled cartridges must include a checksum
character as the last digit.
12
Setting Up Logical Libraries
12-7