Loading Cartridges; Installing Cartridges In The Reserved Slots - Qualstar XLS Series Installation Manual

13
This chapter provides instructions for the following tasks related to loading cartridges
into the XLS:
• Installing cartridges in the reserved slots. See
• Precautions for handling cartridges (see
• Preparing cartridges (see
• Bulk-loading the data and cleaning cartridges (see
Important:
13.1

Installing Cartridges in the Reserved Slots

Each LRM includes five reserved slots for the tape drive calibration cartridge and four
cleaning cartridges. You must install the calibration cartridge in order to calibrate the
positions of the tape drives. The cleaning cartridges are used when you request tape drive
cleaning from X-Link.
XLS Library Installation Manual

Loading Cartridges

Section 13.3 on page
You can also install cartridge using the I/O ports. For
instructions, refer to the chapter on importing and
exporting cartridges in the XLS User's Manual.
Section 13.1
Section 13.2 on page
13-4)
Section 13.4 on page
13-3)
13-5)
13-1