Qualstar XLS Series Installation Manual page 48

3.2 Unpacking the XLS
2. Push down on the release lever, then lift up on the latch to detension the strap.
See
Figure 3-4 Ratchet on the web strap
3. Unhook the strap from the upper and lower eye bolts.
4. Repeat steps 2 and 3 to remove the other straps.
5. Using a 1/2-inch socket or open-end wrench, remove the four shipping brackets
from the top of the unit. See
Figure 3-5 Removing a shipping bracket
6. Remove the cardboard spacer from the top of the XLS.
7. Remove the shrink-wrap from around the unit.
8. Lift the plastic sheeting off of the unit.
3-6
Figure 3-4.
Figure 3-5.
501601 Rev. 07-01-19