Connecting The Carousel Controller Cable - Qualstar XLS Series Installation Manual

Figure 5-10 Storing the screws in the top of the MEM
Important:
5. Turn the carousel by hand to ensure that it rotates smoothly and without
encountering any obstructions. The carousel will be hard to turn.
Do not use the edges of the cartridge slots to turn the carousel.
5.5

Connecting the Carousel Controller Cable

The carousel controller cable connects the system controller in the LRM to the carousel
controller at the back of the MEM. This cable allows the LRM to provide power and
control to the MEM.
XLS Library Installation Manual
Top of MEM
Be sure to store the screws in the top of the MEM; they
may be required later for service use.
CAUTION
5
Installing a MEM
5-9