Installing A Rack Into The Xls-820500 Or Xls-812300 - Qualstar XLS Series Installation Manual

7.3

Installing a Rack into the XLS-820500 or XLS-812300

Required tools:
• #2 Phillips screwdriver
Required equipment:
• Two slide assemblies
• Ten 8-32 × 1/4 Phillips screws
• Power cord
Equipment rack
Figure 7-10 Back of XLS-812300 with the optional equipment rack installed
To install a rack into the XLS-820500 or XLS-812300, follow these steps:
XLS Library Installation Manual
Obtain the following:
Make sure you have the following included with the rack:
7
Installing an Equipment Rack
7-9