Qualstar XLS Series Installation Manual page 198

12.2 Creating a New Logical Library
When you press Next Step, the third Create Logical Library page opens, as
shown in
Figure 12-6 Create Logical Library page (step 3 of 3)
8. Enter information for the primary contact and, optionally, a secondary contact for
this logical library. The primary and secondary contacts are typically responsible
for the department or division that owns any data stored on the logical library.
Important:
9. Press Finish to create a logical library with the requested number of cartridge
slots, tape drives, and I/O ports.
12-10
Figure 12-6.
The information listed for the Primary and Secondary
Contact Information fields is for display purposes only.
The XLS does not use this information. If you want the
contacts listed to receive e-mail or pager alerts, be sure
to define them as library users (see the XLS Library
User's Guide).
501601 Rev. 07-01-19