Qualstar XLS Series Installation Manual page 22

1.2 Library Resource Module (LRM)
1.2.4 Tape Drives
Maximum number of tape
drive assemblies
Number of drive bays
Table 1-1 Available tape drives by model
Tape Drive Assemblies
Shown in Figure
enclosed in a drive carrier.
Figure 1-14 Fibre Channel tape drive assembly (rear view)
Two models of tape drives are available: SCSI tape drive assemblies include dual SCSI
HD68 connectors and a single status LED, while Fibre Channel tape drive assemblies
include a duplex LC multi-mode Fibre Channel receptacle and three LEDs.
Depending on the capabilities of the application software being used, the Fibre Channel
tape drive assemblies can be removed and replaced without powering down the library.
The library automatically detects the presence of a new tape drive.
1-14
XLS-812300 XLS-8161100
12
1 to 3
1-14, an XLS tape drive assembly consists of an LTO tape drive
Models
XLS-820500
16 20
1 to 4 1 to 5
XLS-832700
32
1 to 8
501601 Rev. 07-01-19