Qualstar XLS Series Installation Manual page 245

alert
barcode reader
calibration
cartridge
carousel
cartridge bay
cartridge
inventory
cartridge slot
door slot
drive bay
drive carrier
elements
EMI
XLS Library Installation Manual
A notification sent to specified users when an event occurs in the library.
The device on the library's robotic handler that scans and reads barcode
labels on the cartridges.
A special cartridge containing a triangular target (fiducial) that is inserted
into each tape drive during the calibration process.
The rotating mechanism in a Media Expansion Module (MEM) that holds
the cartridges.
The removable hardware that contains slots for 30 cartridges and is
interchangeable with a drive bay.
The internal data base of cartridge locations that is maintained by the
system controller.
Any of the locations in the library that can store a cartridge. A cartridge
slot is referred to as a storage element in the SCSI standard.
Any of the cartridge slots that can be installed on the inside of the library's
doors.
The removable hardware in the library that can contain up to four tape
drives and that is interchangeable with a cartridge bay.
The hardware that encloses the tape drives and provides power, SCSI or
Fibre Channel connectors, communications with the system controller,
status LEDs, and cooling fans.
The addressable locations in the library, including the tape drives, the
cartridge slots, the handler, and the I/O ports slots.
Electro magnetic interference.
Glossary
GL-1