Qualstar XLS Series Installation Manual page 60

4.1 Removing the Shipment Locks on the Handler
2. Using wire cutters or scissors, cut and remove the cable tie that holds the gripper
head in place. See
Figure 4-1 Location of cable tie securing the gripper head
3. Cut and remove the cable tie that holds the X-axis in place. See
Cable tie
Figure 4-2 Location of cable tie securing the X-axis
4. Close any open doors.
4-2
Figure
Cable tie
4-1.
Figure 4-2.
501601 Rev. 07-01-19