Viewing The Inventory Report - Qualstar XLS Series Installation Manual

12.3

Viewing the Inventory Report

In order to install cartridges into a logical library (see
Cartridges"), you need to know which cartridge slots were assigned to the logical library
when it was created.
To view a report showing which slots are assigned to a logical library, follow these steps:
1. Access the Logical Libraries portlet as described in
2. Select the radio button to the left of the logical library name, then select View
Inventory from the Media and Tape Drives list.
or
In the Cartridges section of the table, select an underlined hyperlink for the
logical library. (This automatically selects the radio button for the logical
library.)
The View Inventory page opens, as shown in
Figure 12-7 View Inventory page
3. Review or sort the report as follows:
XLS Library Installation Manual
12
Setting Up Logical Libraries
Chapter 13, "Loading
Section 12.2.1 on page
Figure 12-7.
12-3.
12-11