11.5 Entering Configuration Information
Changing the Administrator Password
When the library is shipped, the default user ID is admin. This user has permission to
perform all tasks.
To prevent unauthorized users from logging into the XLS, you must
change the password for the default user, as described in this section.
To change the administrator password, follow these steps:
1.
If necessary, press the Home button in the upper right corner of any page to
return to the Home page.
2.
Select Administrator View to display the Users & Groups portlet, shown in
Figure
Figure 11-25 Users & Groups portlet
3.
From the Users & Groups portlet, select Manage Users & Groups.
4.
In the User ID field, enter admin.
5.
Press Select to select the admin user.
11-30
CAUTION
11-25.
501601 Rev. 07-01-19