Qualstar XLS Series Installation Manual page 200

12.3 Viewing the Inventory Report
– To scroll through the report, use the scroll bar on your browser or by selecting
– To sort the rows in ascending or descending order, press the underlined
4. If the logical library contains more than 500 cartridge slots, display the next
group of cartridge slots by selecting the page links ([First/Prev], 1, 2, 3,...,
[Next/Last]).
Important:
5. The inventory report can be filtered to show all slots, only full or empty slots and
either storage, I/O port, drive, or all three slot types at once by selecting the
appropriate drop-down lists. The report automatically updates when the
drop-down lists are changed.
6. To export the inventory report, press Excel, XML, or CSV. Then, as prompted,
save the file.
7. Print the report(s) to use when installing cartridges.
Table 12-2
Addresses,"
Field
Element Type
Library
SCSI Element
Cabinet
Column
Table 12-2 Fields on View Inventory page
12-12
the page links ([First/Prev], 1, 2, 3,..., [Next/Last]) if there are more than
fivehundred elements shown.
heading of the column you want to sort by.
All tape drives and I/O port slots are displayed
immediately following the cartridge slots.
describes the fields in the inventory report. Refer to
to learn the physical location of each column and row position
Description
The type of element: tape drive, cartridge slot, or I/O port
The name of the library where the element is located
The SCSI element address that is currently assigned to this location
A number identifying which LRM or MEM cabinet the element is located
in
A letter identifying which column the element is located in. Refer to
Appendix A, "Library Addresses,"
Appendix A, "Library
for more information.
501601 Rev. 07-01-19