Qualstar XLS Series Installation Manual page 2

Copyright© 2006-2010 by Qualstar Corporation — All Rights Reserved
Information contained in this document is copyrighted by Qualstar Corporation. It is
intended for use by Qualstar's customers and prospective customers to evaluate,
integrate, operate, and maintain Qualstar products. Customers and prospective
customers may reproduce this document as needed for these uses. Reproduction in whole
or in part for any other use or by any other party is prohibited without prior written
permission from Qualstar Corporation.
Every effort has been made to keep the information contained in this document current
and accurate as of the date of publication or revision. However, no guarantee is given or
implied that the document is error-free or that it is accurate with regard to any
specification.
Qualstar reserves the right to modify the design or specification without notice. This
specification may not be construed as a contractual obligation except as specifically
agreed to by Qualstar in writing at the time of order.
and the Qualstar logo are registered trademarks and X-Link is a trademark of
Qualstar
Qualstar Corporation. Other trademarks are the property of their respective owners.
Revision Release Date Description
A
B
C
D
E
07-01-19
II
Disclaimer
Trademark Notices
Revision History
17-Mar-2006 Initial release
29-Jun-2006 All chapters revised. Includes instructions for the XLS-820500.
All chapters revised and reorganized. Includes instructions for the
15-Nov-2006
XLS-812300.
31-May-2007 All chapters revised. Includes instructions for the equipment rack.
All chapters revised. Includes instructions for the XLS-85000 and
08-Jan-2010
XLS-8161100.
Address updated
01-Jul-2019
501601 Rev. 07-01-19