Qualstar XLS Series Installation Manual page 150

11.1 Connecting the XLS to a Computer
5. Type the library's hostname, http://qualstarxls, in the address line for the
browser. See
Figure 11-3 Entering the hostname (Internet Explorer shown)
6. Press Enter. The X-Link log-in page is displayed.
7. Log into X-Link as described in
11.1.2 Connecting to a Standalone Computer
To connect the XLS to a standalone computer, follow these steps:
1. Set the computer's IP address to the following settings:
– IP address: 192.168.0.245
– Subnet mask: 255.255.255.0
2. Insert one end of the Ethernet cable into the service port (ENET 1).
Note:
3. Connect the other end of the cable to the computer's Ethernet port.
4. Start the Internet browser.
5. In the address line for the browser, type the default IP address for the service
port, http://192.168.0.1. See
Figure 11-4 Entering the service port IP address (Internet Explorer shown)
6. Press Enter. The X-Link log-in page opens.
11-4
Figure 11-3.
The service port for the XLS-8161100 amd XLS-832700 is located behind
the air filter cover on the front of the library (see
page 11-2). The service port for the XLS-820500 and XLS-812300 is
located on the power/PC bay.
Figure
Section 10.3 on page
11-4.
10-12.
Figure 11-2 on
501601 Rev. 07-01-19