Qualstar XLS Series Installation Manual page 142

10.2 Connecting the Library to Power
Table 10-2
LED
Attention
Network Activity
Library Activity
Robot Activity
Fault
Table 10-2 Meanings of the status LEDs
Tape Drive Assembly LEDs
Figure 10-8
assembly. The SCSI tape drive assemblies include the Drive Status LED only.
Drive Status LED
Link LED (FC only)
Activity LED (FC only)
Figure 10-8 Status LEDs on a Fibre Channel tape drive assembly
10-10
lists the meanings of the status LEDs
State
Slow flash
Fast flash
Solid yellow
Flashing green
Steady green
Flashing green
Flashing red
shows the location of the LEDs on the back of the Fibre Channel tape drive
Indicates
One or more doors is open or unlocked
One or more of the light curtain sensors is blocked (for
example, a cartridge may be protruding from a slot)
One or more I/O ports is open
There is activity on the Ethernet network (currently not
implemented)
The XLS is powered on and in an error-free state
(currently not implemented)
The handler or the carousel is moving
The XLS has experienced an unrecoverable error or it is
has been shut down from X-Link
501601 Rev. 07-01-19