2.
Select Administrator View or Show All to display the Configuration portlet,
shown in
Figure 11-28 Configuration portlet
3.
Select View/Edit HBA Target ID. The View/Edit HBA Target ID page opens, as
shown in
Figure 11-29 View/Edit HBA Target ID page
4.
In the Host Bus Adapter drop-down list, select the HBA port you want to
change the target ID for. Since the XLS supports four HBAs with two ports each,
XLS Library Installation Manual
Figure
11-28.
Figure
11-29.
11
Configuring the Physical Library
11-33